perma FUTURA PLUS

perma FUTURA PLUS can be used in all types of applications with ambient temperatures from 0 to +40 °C. Depending on operating conditions, a lubricant volume of 120 cm³ is dispensed in 1, 3, 6 or 12 months. Reliable function is based on an electrochemical reaction, which is started by simply turning the activation cap. The contained gas generator generates a pressure of max. 4 bar, which moves the piston forward and transports lubricant into the lubrication point.

Applications

perma FUTURA PLUS is used for single-point lubrication of roller and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals, chains etc. Main application areas are wind turbines and the food industry. perma FUTURA PLUS has a corrosion-proof plastic housing, which makes it ideal for hygienically clean environments.

Product characteristics

Simple activation through integrated activator
One-time activation: 1, 3, 6 or 12 months

- No separate activator necessary
- Tamper-proof, easy to use
- Economical, permanent lubrication
- Quick and easy exchange without special tools

Transparent plastic housing with integrated support flange

- Easy fill level check via permanently visible position of piston in lubrication system
- Corrosion-proof

Ex-proof certification

- Safe and reliable lubrication in explosive areas
- Better workplace safety, since dangerous areas have to be visited for maintenance less often

Technical Data

Drive

Electrochemical reaction
Housing

Transparent plastic
Discharge period

1, 3, 6, 12 months
Lubricant volume

120 cm³
Operating temperature

0 to +40 °C
Pressure build-up

Max. 4 bar
Lubricants

Grease up to NLGI 2 / oil
Max. tube lengths

1.00 m
CE

✅
Ex

✅

INSTALLATION KITS

INSTALLATION KIT Direct Mounting
(Art. No. 101476)

Order lubrication system separately

	Contents
A	1 x Reducer G1/8 male x G1/4 female 1 x Reducer M6 male x G1/4 female 1 x Reducer M8x1 male x G1/4 female 1 x Reducer M10x1 male x G1/4 female
B	1 x Extension G1/4 male x G1/4 female - 45 mm
C	1 x Angle 45° G1/4 male x G1/4 female

INSTALLATION KIT Remote Mounting with Heavy Duty hose
(Part no. 101481)

Order lubrication system separately

	Contents
A	1 x Reducer G1/8male x G1/4 female 1 x Reducer M6 male x G1/4 female 1 x Reducer M8x1 male x G1/4 female 1 x Reducer M10x1 male x G1/4 female
B	1 x Extension G1/4 male x G1/4 female - 45 mm
C	1 x Angle 45° G1/4 male x G1/4 female
D	2 x Tube connector G1/4 male for tube iØ 9,5 mm (steel, zinc-plated) - push-lock
E	1.5 m Heavy Duty hose up to +100 °C (with NBR lining and fabric insert)
F	1 x 1 point bracket G1/4 female for 1 lubrication system

Part numbers

perma FUTURA PLUS Grease – 1 Month
Description	Art. No.
perma Multipurpose grease SF01	113917
perma Extreme pressure grease SF02	113921
perma High temp. grease SF03	113923
perma High performance grease SF04	113927
perma High temp. / Extreme pressure grease SF05	113931
perma Liquid grease SF06	113935
perma High speed grease SF08	113939
perma Multipurpose bio grease SF09	113943
perma Food grade grease H1 SF10	113947

perma FUTURA PLUS Grease – 3 Months
Description	Art. No.
perma Multipurpose grease SF01	113918
perma Extreme pressure grease SF02	113922
perma High temp. grease SF03	113924
perma High performance grease SF04	113928
perma High temp. / Extreme pressure grease SF05	113932
perma Liquid grease SF06	113936
perma High speed grease SF08	113940
perma Multipurpose bio grease SF09	113944
perma Food grade grease H1 SF10	113948

perma FUTURA PLUS Grease – 6 Months
Description	Art. No.
perma Multipurpose grease SF01	113919
perma Extreme pressure grease SF02	113602
perma High temp. grease SF03	113925
perma High performance grease SF04	113929
perma High temp. / Extreme pressure grease SF05	113933
perma Liquid grease SF06	113937
perma High speed grease SF08	113941
perma Multipurpose bio grease SF09	113945
perma Food grade grease H1 SF10	113949

perma FUTURA PLUS Grease – 12 Months
Description	Art. No.
perma Multipurpose grease SF01	113920
perma Extreme pressure grease SF02	113603
perma High temp. grease SF03	113926
perma High performance grease SF04	113930
perma High temp. / Extreme pressure grease SF05	113934
perma Liquid grease SF06	113938
perma High speed grease SF08	113942
perma Multipurpose bio grease SF09	113946
perma Food grade grease H1 SF10	113950

perma FUTURA PLUS Oil – 1 Month (with integrated oil retaining valve)
Description	Art. No.
perma High performance oil SO14	113951
perma Multipurpose oil SO32	113955
perma Bio oil, low viscosity SO64	113959
perma Bio oil, high viscosity SO69	113963
perma Food grade oil H1 SO70	113967

perma FUTURA PLUS Oil – 3 Months (with integrated oil retaining valve)
Bezeichnung	Art. No.
perma High performance oil SO14	113952
perma Multipurpose oil SO32	113956
perma Bio oil, low viscosity SO64	113960
perma Bio oil, high viscosity SO69	113964
perma Food grade oil H1 SO70	113968

perma FUTURA PLUS Oil – 6 Months (with integrated oil retaining valve)
Bezeichnung	Art. No.
perma High performance oil SO14	113953
perma Multipurpose oil SO32	113957
perma Bio oil, low viscosity SO64	113961
perma Bio oil, high viscosity SO69	113965
perma Food grade oil H1 SO70	113969

perma FUTURA PLUS Oil – 12 Months (with integrated oil retaining valve)
Bezeichnung	Art. No.
perma High performance oil SO14	113954
perma Multipurpose oil SO32	113958
perma Bio oil, low viscosity SO64	113962
perma Bio oil, high viscosity SO69	113966
perma Food grade oil H1 SO70	113970

There are several ways to seal a hydraulic cylinder, and using different types of seals can help prevent leaks and ensure proper operation of the cylinder. Here are a few ideas:

Use a piston seal to create a barrier between the moving piston and the cylinder wall. This can help prevent fluid leakage and reduce friction. Synonyms for piston seal include:

O-ring
Gasket
Packing

Use a rod seal to seal the gap between the rod and the cylinder head. This can help prevent fluid from escaping and can also help reduce friction. Synonyms for rod seal include:

Lip seal
U-cup seal
Scraper seal

Use a wiper to remove contaminants and debris from the rod as it moves in and out of the cylinder. This can help prevent damage to the seals and improve the overall performance of the cylinder. Synonyms for wiper include:

Scraper
Cleaner
Brush

Use a guide band to help position the rod and prevent it from tilting or misaligning as it moves within the cylinder. Synonyms for guide band include:

Guide ring
Guide bushing
Guide sleeve

It's important to use the appropriate seals and other components for your specific hydraulic cylinder to ensure proper sealing and operation.

There are several ways to seal a hydraulic cylinder:

1. Piston seal: This is a sealing element that prevents fluid from leaking past the piston as it moves within the cylinder. Some synonyms for this component include: O-ring, packing, seal ring.

2. Rod seal: This is a sealing element that prevents fluid from leaking past the rod as it extends and retracts within the cylinder. Some synonyms for this component include: lip seal, scraper seal, dynamic seal.

3. Wiper: This is a component that removes contaminants and debris from the rod as it extends and retracts within the cylinder. Some synonyms for this component include: dust seal, dirt scraper, rod protector.

4. Guide band: This is a component that helps guide the rod as it extends and retracts within the cylinder. Some synonyms for this component include: guide ring, guide bushing, rod guide.

It's important to properly seal a hydraulic cylinder to ensure the system operates efficiently and effectively. Using high-quality sealing elements and regularly maintaining and replacing them as needed can help prolong the life of the cylinder and prevent costly repairs.

Piston seal: O-ring, gasket, packing, sealing ring, sealing element Rod seal: Lip seal, radial seal, dynamic seal, reciprocating seal, shaft seal Wiper: Scraper, cleaner, wipeless seal, dust seal, dirt seal Guide band: Guide ring, guide bushing, guide element, guiding element, guiding ring

A slydring is a type of hydraulic seal specifically designed for use in high-pressure, high-temperature environments. It is made of a special material called PTFE (polytetrafluoroethylene) that is resistant to wear and abrasion, and it is used to seal the gap between a piston rod and a cylinder bore in a hydraulic cylinder.

A glydring is a type of hydraulic seal that is similar to a slydring in that it is made of PTFE and is used in high-pressure, high-temperature environments. However, a glydring is designed to seal the gap between two moving parts in a hydraulic system, such as between a pump and a motor or between two rotating shafts.

A slydring is a type of seal that is used to seal the gap between a moving and a stationary component in a hydraulic system. It is typically made of a flexible material such as rubber or polyurethane and is designed to provide a low-friction seal that prevents leakage of fluid or contaminants from the system.

A glydring is a type of seal that is similar to a slydring but is made of a material that is resistant to high temperatures and is specifically designed for use in high-temperature applications. It is often used to seal gaps between moving and stationary components in high-temperature hydraulic systems or in other high-temperature environments.

A single acting piston seal is a type of seal that is used in a hydraulic cylinder that only applies pressure in one direction. This type of seal is typically used in applications where the cylinder only needs to extend or retract, such as in a dump truck hoist or a car jack.

A double acting piston seal, on the other hand, is a type of seal that is used in a hydraulic cylinder that applies pressure in both directions. This type of seal is typically used in applications where the cylinder needs to extend and retract, such as in a hydraulic press or a hydraulic lift.

An example of a single acting piston seal might be a rubber o-ring that is used to seal the gap between the cylinder and the piston in a single acting hydraulic cylinder. An example of a double acting piston seal might be a pair of u-shaped seals that are used to seal the gap between the cylinder and the piston in a double acting hydraulic cylinder.

A single acting piston seal is a type of seal that is used to seal the gap between a moving and a stationary component in a hydraulic system where fluid pressure is applied to only one side of the piston. This type of seal is typically used in applications where the piston only needs to move in one direction. An example of a single acting piston seal is a seal used in a hydraulic jack or a hydraulic press.

A double acting piston seal is a type of seal that is used to seal the gap between a moving and a stationary component in a hydraulic system where fluid pressure is applied to both sides of the piston. This type of seal is typically used in applications where the piston needs to move in both directions. An example of a double acting piston seal is a seal used in a hydraulic cylinder on a bulldozer or a hydraulic cylinder on a forklift.

Click here to send a message or inquiry

GermanBase GmbH
Am Halberg 10
D-66121 Saarbruecken

Germany

Fax: +49 681 950910-9
e-mail: info@germanbase.de